Beaver Blade brush cutter blade, 8"

The Beaver Blade turns your brushcutter or heavy duty weed-eater into the ultimate brush clearing machine.

Beaver Blade brush cutter blade, 8" View larger



The Beaver Blade turns your brushcutter or heavy duty weed-eater into the ultimate brush clearing machine.

More details

More info

The Beaver Blade turns your brushcutter or heavy duty weed-eater into the best brush cutting tool available. Once you’ve used them, you’ll never go back to standard brush blades. We’ve been using them for our winter brush clearing work for over 5 years, and I really can’t recommend them enough. It improves on the standard blades that you get with your brushcutter in three important ways:

  1) It incorporates actual chain saw links into its design, meaning larger, stronger cutting teeth that are easier to sharpen. The design of the chainsaw teeth allows for clearing the wood chips more easily and reduce resin build up both of which can slow the cutting of traditional brushcutter blades.
     2) These teeth are, in-fact, part of a loop of saw chain that runs around the circumference of the disk blade, and are not bound to the disk directly. This allows the chain to slide around the disk when substantial force is applied, acting as a clutch mechanism. This reduces jerking when you do get the blade pinched or hit it against a hard object and also reduces vibration while cutting. This increases your safety, comfort and work endurance.
    3) The disk is made of heavy gauge steel. The mass of the disk acts as a fly wheel, it maintains momentum well and thus keeps the disk keeps spinning fast for high speed cutting. It can cut through stems up to 1.5" instantly, and quickly tears into of larger diameter stems.

The overall effect is that you can clear brush approximately 50% faster than with a standard brush blade with much reduced operator fatigue. You can easily cut large stems up to 3.5”, and can even tackle small trees up to 8” in diameter with a little care working on both sides of the trunk.

Beaver Blades are made in the USA with high-quality steel and real saw chain. They can be sharpened with the common 3/16" chain saw file. Though they cut surprisingly well even when dull, they should be sharpened after 4-8 hours of use (assuming you haven't hit any rocks or the dirt) for maximum performance. When you wear the teeth down to nubs, you don't have to throw your Beaver Blade out! They can be outfitted with a new chain, a service we will be providing for about $35 (contact us directly for this service).

Brushcutters in general are better than chainsaws for brush clearing since you don’t need to bend over to make your cut. Just remember to apply concentrated herbicide to the every stump of a deciduous tree or shrub that you cut, or it will resprout.

The 8” Beaver Blade attaches to most mid-powered weed-eaters/brush cutters to high powered brush saws. It fits the most common 1” arbor size found on brush-cutters, and comes with an adaptor to work with 20mm arbors. The 8” cutting disk will fit most of these mid-to-high end units, though you may need to do some modification to fit it with the safety guard on your brushcutter (with our Stihl brush cutters, we need to file down the bottom edge of our safety guard just about 1/8” for the beaver blade to clear, since the guard is designed for the thinner blades that Stihl produces.)

From The Manufacturer:

The Beaver Blade’s patented circular chainsaw chain-in-groove design allows the chain to absorb some of the sudden shocks and stresses that can easily shatter a fixed-tooth brush blade, because the chain slips slightly in the groove when it hits obstacles. The weight of the machine is supported by the wheels, so there's far less chance for the blade to twist, bind, or kick back.

Cart 0 Product Products (empty)

No products

Free shipping! Shipping
$0.00 Total

Check out

Product successfully added to your shopping cart


There are 0 items in your cart. There is 1 item in your cart.

Total products
Total shipping  Free shipping!
Continue shopping Proceed to checkout